Before you start to apply your wall stickers we suggest you take a minute to prepare yourself and read these instructions through fully. Although our wall sticker is easy to fit, it does require a little patience for larger items. It’s a good idea to plan where you are going to put your new purchase in advance of peeling the silicon paper off. Care needs to be taken when fitting or reposition the wall stickers as it is not a reusable item.

Wall stickers are sensitive to extremes of temperature so store them in the tube supplied until you are ready to apply them. Do not apply them in humid conditions.

Wall Stickers   /   Graphic Wall Stickers   /   Self-Adhesive Wall Papers or Wall Borders   /   Window Films

When removing wall stickers, painted walls are at higher risk from damage. Please work slowly and do not rip, snatch or pull the wall sticker out from the wall at 90 degrees. Using a hair dryer, gradually heat the sticker directly at the edge you are removing. When the sticker feels warm gently lift edge by getting a finger nail or a pin under. As you pull the sticker away, heat the next section of sticker directly in front of the piece you lifted. If you feel a bubble under the paint surface you need to take care lifting over the area. Use your second hand to press down on the bubble as you lift the sticker off. Pull it back against itself like it is being folded back. Caution: Newly painted walls should be completely dry before applying the wall stickers. It will need to wait at least 3weeks after painting before you apply our stickers to the freshly painted wall. Even if the paint will feel dry to the touch soon, it is still wet and will react with the edges of the stickers not stick properly. Drying time depends on the environment, the time of year, the number of layers of paint and the paint brand used.

Separate a corner of the ‘window film’ and liner with 2 small pieces of adhesive tape on either side of the product.